| Name: | Description: | Used in/Using parameters: | Default expression (mm): |
| SW1 | Defines the real width of the Dividers' slits. It is equal to 1.5*d(), allowing other Dividers to penetrate easily without tension. |
Used In: CellW, CellW1 (Dividers) |
1.5*d() |
| CellH | - |
Used In: DH1 (Dividers) Using: H (Main) |
H/5 |
| CellW | 0207: - |
Used In: DBW, CellW1 (Dividers) Using: L (Main) Llc (Layers) SW1 (Dividers) |
(L+Llc-2*SW1)/3 |
| 0207a, 0207b: - |
Used In: DBW, CellW1 (Dividers) Using: L (Main) SW1 (Dividers) |
(L-2*SW1)/3 | |
| DBW1 | 0207a, 0207b: Defines the height of base belonging to the 'hole' divider taking into account the width of the middle cell, belonging to the partition strip, as well as both the I90X correction when the folding is at 90 degrees and is parallel to the X axis and the panel correction. |
Used In: DH1 (Dividers) Using: W (Main) C90X, O90X (Corrections) Wlc (Layers) |
(W+Wlc)/2+C90X-O90X |
| 0207: Defines the height of base belonging to the 'hole' divider taking into account the width of the middle cell belonging to the partition strip as well as the I90X correction when the folding is at 90 degrees and is parallel to the X axis. |
Used In: DH1 (Dividers) Using: W (Main) C90X, O90X (Corrections) |
W/2+C90X-O90X | |
| PC1 | Defines the panel correction. |
Used In: PC4, CellW1 (Dividers) |
d() |
| PC4 | 0207: Defines the panel correction. |
Used In: DxCh (Dividers) |
d() |
| 0207b: Defines the panel correction. |
Used In: DxCh (Dividers) Using: PC1, EdgeType (Dividers) |
switch(EdgeType, Flat, 0, Chamfer, PC1, LineExt, PC1) | |
| 0207a: Defines the panel correction. |
Used In: DxCh (Dividers) Using: PC2, EdgeType (Dividers) |
switch(EdgeType, Flat, 0, Chamfer, PC2, LineExt, PC2) | |
| DBW | - |
Used In: DH1 (Dividers) Using: I90X (Corrections) CellW (Dividers) |
CellW+2*I90X |
| PC2 | Defines the panel correction. |
Used In: PC4, PC3 (Dividers) |
d() |
| EdgeType | - |
Used In: PC4, PC3 (Dividers) |
Flat |
| ExtL | - | - | 3 |
| PC3 | 0207a, 0207b: Defines the panel correction. |
Used In: DxCh (Dividers) |
d() |
| 0207: Defines the panel correction. |
Used In: DxCh (Dividers) Using: PC2, EdgeType (Dividers) |
switch(EdgeType, Flat, 0, Chamfer, PC2, LineExt, PC2) | |
| DxCh | 0207: - |
Used In: ChL (Dividers) Using: PC3 (Dividers) |
PC3 |
| 0207a, 0207b: - |
Used In: ChL (Dividers) Using: PC4 (Dividers) |
PC4 | |
| ChL | - |
Using: DxCh (Dividers) |
3 |
| CellW1 | 0207b: - |
Using: L (Main) C90X (Corrections) SW1, PC1 (Dividers) |
(L-2*SW1)/3-PC1+C90X |
| 0207a: - |
Using: I90X (Corrections) CellW, PC1 (Dividers) |
CellW-PC1+I90X | |
| 0207: - |
Using: I90Y (Corrections) CellW, PC1 (Dividers) |
CellW-PC1+I90Y | |
| DHC | Defines the correction of the upwards side height belonging to the 'slit' divider. |
Used In: DH (Dividers) |
3 |
| DH | 0207a, 0207b: Defines the upwards side height belonging to the 'slit' divider taking into account height of the box, DHC correction, CH correction, C90X correction as well as the height layers correction. |
Used In: DH1 (Dividers) Using: H (Main) C90X (Corrections) Hlc (Layers) DHC (Dividers) |
(H+Hlc)-DHC+C90X |
| 0207: Defines the upwards side height belonging to the 'slit' divider taking into account height of the box, DHC correction, CH correction, C90X correction as well as the height layers correction. |
Used In: DH1 (Dividers) Using: H (Main) DHC (Dividers) |
H-DHC | |
| DH1 | - |
Using: UL (Main) LSC (Layers) CellH, DBW1, DBW, DH (Dividers) |
DBW+DH-(DBW1+CellH)-UL*LSC |
| HW | Defines the width of the hole belonging to the 'hole' divider, taking into account the material thickness. | - | 2.5*d() |