| Parameter: | Group: | Used in/Using parameters (direct dependence): | Where would the design resize when I change the parameter expression: |
| A | Main |
Used In: DySEB, SBHW, TH, DySTB, SBH1 (Snap Lock) LFH (Self-Locking Flap) alpha, beta (3-D Parameters) |
Length of the box |
| H | Main | - | Height |
| GLC | Main | - | Correction because of the glue flap |
| UL | Main |
Used In: STH (Snap Lock) |
Defines if layers should be used |
| LSC | Layers |
Used In: STH (Snap Lock) |
Layer step crease |
| STLL | Layers |
Used In: STH (Snap Lock) |
Snap tuck layer level |
| DySEB | Snap Lock |
Used In: SBHW, calc, SED (Snap Lock) Using: A (Main) |
Vertical size of the Snap End bevel |
| SBHW | Snap Lock |
Used In: TW, SED (Snap Lock) Using: A (Main) DySEB (Snap Lock) |
Snap Bottom hole width |
| TW | Snap Lock |
Used In: STFR (Snap Lock) Using: SBHW (Snap Lock) |
Tongue width |
| TH | Snap Lock |
Used In: SBH, calc, SED, STFR (Snap Lock) Using: A (Main) |
Tongue height |
| DySTB | Snap Lock |
Used In: STFR (Snap Lock) Using: A (Main) |
Vertical size of the Snap Tuck bevel |
| SBH1 | Snap Lock |
Used In: SBH, DxSEB, calc, SED (Snap Lock) Using: A (Main) |
Snap Bottom height |
| SBH | Snap Lock |
Used In: STH (Snap Lock) Using: TH, SBH1 (Snap Lock) |
Snap Bottom height |
| STH | Snap Lock |
Used In: STFR (Snap Lock) Using: UL (Main) LSC, STLL (Layers) SBH (Snap Lock) |
Snap Tuck height |
| DxSEB | Snap Lock |
Using: SBH1 (Snap Lock) |
Horizontal size of the Snap End bevel |
| SBB | Snap Lock | - | Snap Bottom width correction |
| SBB1 | Snap Lock | - | Snap bottom bevel |
| SEB | Snap Lock | - | Snap End width correction |
| calc | Snap Lock |
Used In: SED (Snap Lock) Using: DySEB, TH, SBH1 (Snap Lock) |
- |
| SED | Snap Lock |
Used In: SEFR (Snap Lock) Using: DySEB, SBHW, TH, SBH1, calc (Snap Lock) |
Distance from catch point to Snap Lock top |
| SEA | Snap Lock | - | Snap end angle |
| SEFR | Snap Lock |
Using: SED (Snap Lock) |
- |
| STFR | Snap Lock |
Using: TW, TH, DySTB, STH (Snap Lock) |
- |
| GL | Glue Flap | - | Glue flap width |
| GLA | Glue Flap | - | Webbed flap angle |
| Ext | Self-Locking Flap |
Used In: LFH (Self-Locking Flap) |
Extension |
| LFH | Self-Locking Flap |
Used In: alpha, beta (3-D Parameters) Using: A (Main) Ext (Self-Locking Flap) |
Locking Flap Height |
| alpha | 3-D Parameters |
Used In: gama (3-D Parameters) Using: A (Main) LFH (Self-Locking Flap) |
Triangular flap angle |
| beta | 3-D Parameters |
Using: A (Main) LFH (Self-Locking Flap) |
- |
| gama | 3-D Parameters |
Using: alpha (3-D Parameters) |
Bevel Angle |