| Name: | Description: | Used in/Using parameters: | Default expression (mm): |
| PH | Defines height of the panels, but also takes part in the definition of the regular flaps' height . |
Used In: FH (Special Interlock) Using: B (Main) |
B-2*d() |
| TEH | Defines height of the special interlocks' tuck ends. |
Used In: TER (Special Interlock) |
12 |
| TER | Defines radius of the Special Interlock's tuck ends. |
Using: TEH (Special Interlock) |
TEH+2 |
| SLD | Defines depth of the special interlocks' slit locks. | - | 2 |
| SLL | Defines length of the special interlocks' slit locks. |
Used In: DxCT, DxTB1 (Special Interlock) |
4 |
| CL | Defines special interlocks' female cut length (along with the adjacent tapers). Also, takes part in the definition of the horizontal offset, belonging the female cut. |
Used In: HCO (Special Interlock) Using: A (Main) |
0.4*A |
| DxCT | Defines horizontal size of the female cut tapers. |
Used In: DxTB1 (Special Interlock) Using: SLL (Special Interlock) |
SLL+d()/2 |
| CO | Defines offset of the female cut's depth. | - | 1.5*d() |
| CD | Defines cut depth. | - | 2 |
| HCO | Defines horizontal offset of the female cuts. Also, takes part in the definition of the trapezium bevel's horizontal size (DxTB1). |
Used In: DxTB1 (Special Interlock) Using: A (Main) CL (Special Interlock) |
(A-CL)/2 |
| TPH | Defines the height of both trapezium. |
Using: B (Main) |
B-d() |
| DxTB1 | Defines horizontal size of the trapeziums' bevesl. |
Using: SLL, DxCT, HCO (Special Interlock) |
HCO+DxCT-SLL |
| FH | Defines height of all regular flaps. |
Using: UL (Main) LSC (Layers) PH (Special Interlock) |
PH+UL*LSC |
| SLA | Defines angle of the special interlocks' slit locks. | - | 45 |
| DxT1 | Defines horizontal size of both tapers belonging to the regular flaps. | - | 1.5*d() |
| DyT1 | Defines vertical size of both tapers belonging to the regular flaps. | - | 3 |