| Parameter: | Group: | Used in/Using parameters (direct dependence): | Where would the design resize when I change the parameter expression: |
| L | Main |
Used In: W (Main) Lss1, Lss (Score-to-Score) |
Real score-to-score length. |
| W | Main |
Used In: Wss, Wss1 (Score-to-Score) FH (Flaps) Using: L (Main) |
Real score-to-score width. |
| H | Main |
Used In: Hss (Score-to-Score) |
Real score-to-score height. |
| DT | Main |
Used In: C90X, C90Y, HC90X (Corrections) Wlc, Llc, Hlc (Layers) |
Real score-to-score length, width and height as well as height of the flaps. |
| UL | Main |
Used In: HOLN (Layers) FH1 (Flaps) |
The height of the flap that forms an overlapping layer. |
| C90X | Corrections |
Used In: FH (Flaps) Using: DT (Main) |
Height of the Flaps. |
| C90Y | Corrections |
Used In: Lss1, Wss, Lss, Wss1 (Score-to-Score) Using: DT (Main) |
Real score to score width and length. |
| HC90X | Corrections |
Used In: Hss (Score-to-Score) Using: DT (Main) |
Real score-to-score height. |
| GLC | Corrections |
Used In: Lss1, Wss1 (Score-to-Score) |
Real score-to-score length/width of the side adjoining the glue flap. |
| LPC | Corrections |
Used In: Lss1, Wss1 (Score-to-Score) |
- |
| HILN | Layers |
Used In: Hlc (Layers) |
Height of the shorter side, butr only in case the dimension type is 'inside', i.e. dtID=1. |
| HOLN | Layers |
Used In: Hlc (Layers) Using: UL (Main) |
Height of the shorter side, but only in case the dimension type is 'outside', i.e. dtOD=-1. |
| WILN (0201a, 0201b) | Layers |
Used In: Wlc (Layers) |
Real score-to-score width. |
| WOLN (0201a, 0201b) | Layers |
Used In: Wlc (Layers) |
Real score-to-score width. |
| LILN (0201) | Layers |
Used In: Llc (Layers) |
Real score-to-score length. |
| LOLN (0201) | Layers |
Used In: Llc (Layers) |
Real score-to-score length. |
| LSC | Layers |
Used In: FH1 (Flaps) |
Height of the flaps that are to be overlapped. |
| Wlc (0201a, 0201b) | Layers |
Used In: Wss, Wss1 (Score-to-Score) FH (Flaps) Using: DT (Main) WILN, WOLN (Layers) |
Real score-to-score width (Wss, Wss1) as well as the height of the flaps defined by the FH parameter, i.e. height of the overlapped flaps. |
| Llc (0201) | Layers |
Used In: Lss1, Lss (Score-to-Score) Using: DT (Main) LILN, LOLN (Layers) |
0201: Real score-to-score length (Lss, Lss1). |
| Hlc | Layers |
Used In: Hss (Score-to-Score) Using: DT (Main) HILN, HOLN (Layers) |
Real score-to-score heigth (Hss). |
| Lss1 | Score-to-Score |
Using: L (Main) C90Y, GLC, LPC (Corrections) Llc (Layers) Lss (Score-to-Score) |
0200: Real score-to-score length, taking into account
the glue flap corrections, i.e. the length of the side adjoining the glue
flap.
0200a: Real score-to-score length of the of the side adjoining only one folding. |
| Wss | Score-to-Score |
Used In: Wss1 (Score-to-Score) Using: W (Main) C90Y (Corrections) Wlc (Layers) |
Real score-to-score width. |
| Lss | Score-to-Score |
Used In: Lss1 (Score-to-Score) Using: L (Main) C90Y (Corrections) Llc (Layers) |
Real score-to-score length. |
| Wss1 | Score-to-Score |
Using: W (Main) C90Y, GLC, LPC (Corrections) Wlc (Layers) Wss (Score-to-Score) |
0200: Real score-to-score width of the of the side adjoining
only one folding.
0200a: Real score-to-score length taking into account the glue flap corrections, i.e. the length of the side adjoining the glue flap. |
| Hss | Score-to-Score |
Using: H (Main) HC90X (Corrections) Hlc (Layers) |
Real score-to-score height. |
| FH | Flaps |
Used In: FH1 (Flaps) Using: W (Main) C90X (Corrections) Wlc (Layers) |
Height of the overlapping Flaps as well as the height of the overlapped Flaps. See the raw below. |
| CT1 (0201b) | Flaps | - | - |
| DxTB1 (0201b) | Flaps | - | - |
| FH1 | Flaps |
Using: UL (Main) LSC (Layers) FH (Flaps) |
The height of the Flaps that are to be overlapped by the 'flap' layer, defined by the FH height. |
| CT2 (0201b) | Flaps | - | - |
| DxTB (0201b) | Flaps | - | - |
| DxTB2 (0201b) | Flaps | - | - |
| SE (0201, 0201a) | Slot | - | Extension of the Slot. |
| SW (0201, 0201a) | Slot |
Used In: SW2, SW1 (Slot) |
Width of the sloth. |
| SW2 (0201, 0201a) | Slot |
Used In: DxCh (Slot) Using: SW, EdgeType (Slot) |
0201: 'half' Slot at the side adjoining the glue flap |
| EdgeType (0201, 0201a) | Slot |
Used In: SW2, SW1 (Slot) |
- |
| ChL (0201, 0201a) | Slot |
Using: DxCh (Slot) |
- |
| SW1 (0201, 0201a) | Slot |
Used In: DxCh (Slot) Using: SW, EdgeType (Slot) |
0201a: 'half' Slot at the side adjoining the glue flap |
| DxCh (0201, 0201a) | Slot |
Used In: ChL, ExtL (Slot) Using: SW2, SW1 (Slot) |
- |
| ExtL (0201, 0201a) | Slot |
Using: DxCh (Slot) |
- |
| GL | Glue Flap | - | Height of the Glue Flap. |
| GLA | Glue Flap | - |
The acute angle adjacent to the base of the Glue Flap
(65 |
| GLA1 (0201) | Glue Flap | - | The right angle adjacent to the base of the Glue Flap. |