Name: | Description: | Used in/Using parameters: | Default expression (mm): |
FH | 0204a, 0204b: 0204a: Defines the flap height taking into account the correction when the folding is at 90 degrees and is parallel to the X axis as well as the fact that the Flaps have to meet in the centre without an overlap. Another words, after applying the C90X correction, Flaps should be exact W/2 in height. |
Using: W (Main) C90X (Corrections) Wlc (Layers) |
(W+Wlc)/2+C90X |
0204: 0204: Defines the flap height taking into account the correction when the folding is at 90 degrees and is parallel to the X axis as well as the fact that the Flaps have to meet in the centre without an overlap. Another words, after applying the C90X correction, Flaps should be exact W/2 in height. |
Using: W (Main) C90X (Corrections) |
W/2+C90X | |
CT1 | Correction of the trapezium-shaped slit. | - | 2 |
DxTB1 | Horizontal size of trapezium-shaped slit bevel. | - | 2 |
FH1 | 0204: 0204: Defines the flap height taking into account the correction when the folding is at 90 degrees and is parallel to the X axis as well as length layers correction. |
Using: L (Main) C90X (Corrections) Llc (Layers) |
(L+Llc)/2+C90X |
0204a, 0204b: 0204a: Defines the flap height taking into account the correction when the folding is at 90 degrees and is parallel to the X axis as well as length layers correction. |
Using: L (Main) C90X (Corrections) |
L/2+C90X | |
CT2 | Correction of the trapezium-shaped slit. | - | 3 |
DxTB | Horizontal size of trapezium-shaped slit bevel. | - | 5 |
DxTB2 | Horizontal size of trapezium-shaped slit bevel. | - | 3 |