| Name: | Description: | Used in/Using parameters: | Default expression (mm): |
| LILN | FEFCO 0504 - Inner, FEFCO 0504a - Inner: Defines the length inside Layers number. Related to the number of parts that may be considered as Layers making impact on the inside length of box. Here, glue flap is considered as a layer that makes an impact on the inside length. |
Used In: Llc (Layers) |
0 |
| FEFCO 0504a - Outer: Defines the length inside Layers number. Related to the number of parts that may be considered as Layers making impact on the inside length of box. Here, glue flap is considered as a layer that makes an impact on the inside length. |
Used In: Llc (Layers) |
0+2 | |
| FEFCO 0504 - Outer: Defines the length inside Layers number. Related to the number of parts that may be considered as Layers making impact on the inside length of box. Here, glue flap is considered as a layer that makes an impact on the inside length. |
Used In: Llc (Layers) |
1+2 | |
| LOLN | FEFCO 0504 - Outer, FEFCO 0504a - Outer: Defines the length outside Layers number. Related to the number of parts that may be considered as Layers making impact on the inside length of box. Current value is 0, indicating that there is no need for a layer correction applied to the outside length. |
Used In: Llc (Layers) |
0 |
| FEFCO 0504a - Inner: Defines the length outside Layers number. Related to the number of parts that may be considered as Layers making impact on the inside length of box. Current value is 0+2, indicating that there is no need for a layer correction applied to the outside length. |
Used In: Llc (Layers) |
0+2 | |
| FEFCO 0504 - Inner: Defines the length outside Layers number. Related to the number of parts that may be considered as Layers making impact on the inside length of box. Current value is 0+3, indicating that there is no need for a layer correction applied to the outside length. |
Used In: Llc (Layers) |
0+3 | |
| WILN | FEFCO 0504 - Outer, FEFCO 0504 - Inner, FEFCO 0504a - Inner: Defines width inside Layers number. Related to the number of parts that may be considered as Layers making impact on the inside length of box. Here, current value is also 0.00, indicating that there are no flaps or panels considered as Layers making impact on the inside width of the box. |
Used In: Wlc (Layers) |
0 |
| FEFCO 0504a - Outer: Defines width inside Layers number. Related to the number of parts that may be considered as Layers making impact on the inside length of box. Here, current value is also 1.00, indicating that there are no flaps or panels considered as Layers making impact on the inside width of the box. |
Used In: Wlc (Layers) |
1 | |
| WOLN | FEFCO 0504 - Outer, FEFCO 0504a - Outer: FEFCO 0504 - Outer: Defines width outside Layers number. Related to the number of parts that may be considered as Layers making impact on the inside length of box. Here, current value is 0+2, indicating that there are two Layers making impact on the outside width of the box. Why '0+2' but not directly '2'? Entered that way, this record shows that these two Layers come from the outer box. Whenever a resizable design consists of more than one part, and we have Layers belonging to the one of the parts, but making impact on one of the others, we use '0+number' expression. When the Layers making impact belong to the current design, we use a direct input as is the case with the HILN parameter in 0504a design (see the above raw). |
Used In: Wlc (Layers) |
0 |
| FEFCO 0504 - Inner: FEFCO 0504 - Inner: Defines width outside Layers number. Related to the number of parts that may be considered as Layers making impact on the inside length of box. Here, current value is 0+2+2, indicating that there are two Layers making impact on the outside width of the box. Why '0+2+2' but not directly '2'? Entered that way, this record shows that these two Layers come from the outer box. Whenever a resizable design consists of more than one part, and we have Layers belonging to the one of the parts, but making impact on one of the others, we use '0+2+number' expression. When the Layers making impact belong to the current design, we use a direct input as is the case with the HILN parameter in 0504a design (see the above raw). |
Used In: Wlc (Layers) |
0+2 | |
| FEFCO 0504a - Inner: FEFCO 0504a - Inner: Defines width outside Layers number. Related to the number of parts that may be considered as Layers making impact on the inside length of box. Here, current value is 0+3+2, indicating that there are two Layers making impact on the outside width of the box. Why '0+3+2' but not directly '2'? Entered that way, this record shows that these two Layers come from the outer box. Whenever a resizable design consists of more than one part, and we have Layers belonging to the one of the parts, but making impact on one of the others, we use '0+3+number' expression. When the Layers making impact belong to the current design, we use a direct input as is the case with the HILN parameter in 0504a design (see the above raw). |
Used In: Wlc (Layers) |
0+3 | |
| HILN | FEFCO 0504 - Inner, FEFCO 0504a - Inner: Defines the height inside Layers number. |
Used In: Hlc (Layers) |
0 |
| FEFCO 0504 - Outer, FEFCO 0504a - Outer: Defines the height inside Layers number. |
Used In: Hlc (Layers) |
0+2 | |
| HOLN | Defines height outside Layers number. Related to the number of parts that may be considered as Layers making impact on the inside length of box. Here, current value is also 0, indicating that there is no need for a layer correction applied to the outside length. |
Used In: Hlc (Layers) |
0 |
| Llc | - |
Used In: Lss1, Lss (Score-to-Score) Using: DT (Main) LILN, LOLN (Layers) |
LC(d(), DT, LILN, LOLN) |
| Wlc | Defines the width Layers correction. Related to the number of Layers making impact on the real dimensions of the box. Here, this correction is applied to the width (Wss, Wss1) of the box due to the glue flap. |
Used In: Wss, Wss1 (Score-to-Score) Using: DT (Main) WILN, WOLN (Layers) |
LC(d(), DT, WILN, WOLN) |
| Hlc | Defines the height Layers correction. Related to the number of Layers making impact on the real dimensions of the box. Here, this correction is applied to the height (Hss, Hss1) of the box due to the glue flap. |
Used In: Hss1, Hss (Score-to-Score) Using: DT (Main) HILN, HOLN (Layers) |
LC(d(), DT, HILN, HOLN) |