| Parameter: | Group: | Used in/Using parameters (direct dependence): | Where would the design resize when I change the parameter expression: |
| A | Main |
Used In: B (Main) PH (Panel) |
Length of the box |
| B | Main |
Used In: B1 (Main) Using: A (Main) |
Width of the box |
| H | Main | - | Height |
| B1 (A01.01.00.00.73) | Main |
Using: B (Main) |
- |
| PH (A01.01.00.00.71, A01.01.00.00.72, A01.01.00.00.73) | Panel |
Used In: PH1 (Panel) Using: A (Main) |
Panel Height |
| PH1 (A01.01.00.00.72, A01.01.00.00.73) | Panel |
Using: PH (Panel) |
Panel height |
| GLC (A01.01.00.00) | Main | - | Correction because of the glue flap |
| GL (A01.01.00.00, A01.01.00.00.71, A01.01.00.00.72) | Glue Flap | - | Glue flap width |
| GLA (A01.01.00.00, A01.01.00.00.71, A01.01.00.00.72) | Glue Flap |
Used In: GLA1 (Glue Flap) |
Webbed flap angle |
| GLA1 (A01.01.00.00.71) | Glue Flap |
Using: GLA (Glue Flap) |
Glue flap angle |