| Parameter: | Group: | Used in/Using parameters (direct dependence): | Where would the design resize when I change the parameter expression: |
| A | Main |
Used In: B (Main) DFH (Dust Flap) HHL, HHHO (Hanger Hole) |
Length of the box |
| B | Main |
Used In: PH (Panels) Using: A (Main) |
Width of the box |
| H | Main | - | Height |
| GLC | Main | - | Correction because of the glue flap |
| UL | Main | - | Defines if layers should be used |
| LSC | Layers | - | Layer step crease |
| PH | Panels |
Using: B (Main) |
Panel Height |
| PC1 | Panels |
Used In: HHHO (Hanger Hole) Using: DFC (Dust Flap) |
Panel correction |
| PH1 | Panels |
Used In: PH2 (Panels) |
Panel height |
| PH2 | Panels |
Using: PH1 (Panels) |
Panel height |
| DFH | Dust Flap |
Using: A (Main) |
Dust flap height |
| Z (A01.21.00.01.a) | Dust Flap |
Used In: SLL (Tuck End) |
Length of lock on dust flap |
| ZZ (A01.21.00.01.a) | Dust Flap | - | Horizontal size of dust flap bevel |
| beta | Dust Flap | - | - |
| DxZY | Dust Flap |
Used In: DyZY, ZX (Dust Flap) SLL (Tuck End) |
Horizontal size of dust flap taper |
| DyZY | Dust Flap |
Using: DxZY (Dust Flap) |
Vertical size of dust flap taper |
| ZX | Dust Flap |
Using: DxZY (Dust Flap) |
Horizontal size of dust flap bevel 2 |
| DFC (A01.21.00.01.a) | Dust Flap |
Used In: PC1 (Panels) |
Dust flap correction |
| TEH | Tuck End | - | Tuck end height |
| TEC | Tuck End | - | Tuck end correction |
| SLO | Tuck End | - | Slit lock offset |
| SLD | Tuck End | - | Slit lock depth |
| SLL | Tuck End |
Using: Z, DxZY (Dust Flap) |
Slit lock length |
| OS | Hanger Hole |
Used In: HHL1, HHW1, HHR1, HHHO1, HHVO1 (Hanger Hole) |
Offset step |
| HHL | Hanger Hole |
Used In: HHR, HHHO, HHL1 (Hanger Hole) Using: A (Main) |
Hanger hole length |
| HHW | Hanger Hole |
Used In: HHFR, HHR, HHW1 (Hanger Hole) |
Hanger hole width |
| HHFR | Hanger Hole |
Used In: HHR (Hanger Hole) Using: HHW (Hanger Hole) |
Hanger hole fillet radius |
| HHR | Hanger Hole |
Used In: HHR1 (Hanger Hole) Using: HHL, HHW, HHFR (Hanger Hole) |
Hanger hole radius |
| HHHO | Hanger Hole |
Used In: HHHO1 (Hanger Hole) Using: A (Main) PC1 (Panels) HHL (Hanger Hole) |
Hanger hole horizontal offset |
| HHVO | Hanger Hole |
Used In: HHVO1 (Hanger Hole) |
Hanger hole vertical offset |
| HHL1 | Hanger Hole |
Using: OS, HHL (Hanger Hole) |
Hanger hole length |
| HHW1 | Hanger Hole |
Used In: HHFR1 (Hanger Hole) Using: OS, HHW (Hanger Hole) |
Hanger hole width |
| HHFR1 | Hanger Hole |
Using: HHW1 (Hanger Hole) |
Hanger hole fillet radius |
| HHR1 | Hanger Hole |
Using: OS, HHR (Hanger Hole) |
Hanger hole radius |
| HHHO1 | Hanger Hole |
Using: OS, HHHO (Hanger Hole) |
- |
| HHVO1 | Hanger Hole |
Using: OS, HHVO (Hanger Hole) |
Hanger hole vertical offset |
| GL | Glue Flap | - | Glue flap width |
| GLA | Glue Flap | - | Webbed flap angle |