| Name: | Description: | Used in/Using parameters: | Default expression (mm): |
| A | A10.10.03.03.22, A10.10.03.03.45: Length of the box |
Used In: B (Main) PH (Panels) TW, Shl, HCO (Cut) TPH (Trapezium) PH1 (Flaps) HL (Hole) PH2 (Flaps) TEW, TEO (Locking System) |
100 |
| A10.10.03.03, A10.10.03.03.13, A10.10.03.03.32, A10.10.03.03.44, A10.10.03.03.47, A10.10.03.03.64, A10.10.03.03.a: Length of the box |
Used In: B (Main) PH (Panels) TW, Shl, HCO (Cut) TPH (Trapezium) PH1 (Flaps) HL (Hole) PH2 (Flaps) TEW, TEO (Locking System) |
90 | |
| B | A10.10.03.03.44, A10.10.03.03.45, A10.10.03.03.47: Width of the box |
Used In: PH (Panels) PH1 (Flaps) DxFCB (Cut) HL, HW (Hole) PH4 (Panels) GL1, GL (Glue Flap) Using: A (Main) |
40 |
| A10.10.03.03, A10.10.03.03.13, A10.10.03.03.32, A10.10.03.03.64, A10.10.03.03.a: Width of the box |
Used In: PH (Panels) PH1 (Flaps) DxFCB (Cut) HL, HW (Hole) PH4 (Panels) GL1, GL (Glue Flap) Using: A (Main) |
60 | |
| A10.10.03.03.22: Width of the box |
Used In: PH (Panels) PH1 (Flaps) DxFCB (Cut) HL, HW (Hole) PH4 (Panels) GL1, GL (Glue Flap) Using: A (Main) |
80 | |
| H | A10.10.03.03, A10.10.03.03.13, A10.10.03.03.32, A10.10.03.03.44, A10.10.03.03.45, A10.10.03.03.47, A10.10.03.03.64, A10.10.03.03.a: Height | - | 150 |
| A10.10.03.03.22: Height | - | 160 | |
| UL | Defines if layers should be used |
Used In: PH1, PH2 (Flaps) PH3 (Panels) GL1 (Glue Flap) |
Yes |
| GLC | Correction because of the glue flap | - | GlueCorr(d()) |