| Parameter: | Group: | Used in/Using parameters (direct dependence): | Where would the design resize when I change the parameter expression: |
| A | Main |
Used In: B (Main) SBHW (Snap Lock) |
Length of the box |
| B | Main |
Used In: PH (Flaps) DySEB, TH, DySTB, SBH1 (Snap Lock) Using: A (Main) |
Width of the box |
| H | Main | - | Height |
| GLC | Main | - | Correction because of the glue flap |
| UL | Main |
Used In: PH1 (Flaps) STH (Snap Lock) |
Defines if layers should be used |
| LSC | Layers |
Used In: PH1 (Flaps) STH (Snap Lock) |
Layer step crease |
| STLL | Layers |
Used In: STH (Snap Lock) |
Snap tuck layer level |
| PH | Flaps |
Used In: PH1 (Flaps) Using: B (Main) |
Panel Height |
| PH1 | Flaps |
Using: UL (Main) LSC (Layers) PH (Flaps) |
Panel height |
| DxT1 | Flaps | - | Horizontal size of the taper |
| DyT1 | Flaps | - | Vertical size of the taper |
| DySEB | Snap Lock |
Used In: SBHW, calc, SED (Snap Lock) Using: B (Main) |
Vertical size of the Snap End bevel |
| SBHW | Snap Lock |
Used In: TW, SED (Snap Lock) Using: A (Main) DySEB (Snap Lock) |
Snap Bottom hole width |
| TW | Snap Lock |
Used In: STFR (Snap Lock) Using: SBHW (Snap Lock) |
Tongue width |
| TH | Snap Lock |
Used In: SBH, calc, SED, STFR (Snap Lock) Using: B (Main) |
Tongue height |
| DySTB | Snap Lock |
Used In: STFR (Snap Lock) Using: B (Main) |
Vertical size of the Snap Tuck bevel |
| SBH1 | Snap Lock |
Used In: SBH, DxSEB, calc, SED (Snap Lock) Using: B (Main) |
Snap Bottom height |
| SBH | Snap Lock |
Used In: STH (Snap Lock) Using: TH, SBH1 (Snap Lock) |
Snap Bottom height |
| STH | Snap Lock |
Used In: STFR (Snap Lock) Using: UL (Main) LSC, STLL (Layers) SBH (Snap Lock) |
Snap Tuck height |
| DxSEB | Snap Lock |
Using: SBH1 (Snap Lock) |
Horizontal size of the Snap End bevel |
| SBB | Snap Lock | - | Snap Bottom width correction |
| SBB1 | Snap Lock | - | Snap bottom bevel |
| SEB | Snap Lock | - | Snap End width correction |
| calc | Snap Lock |
Used In: SED (Snap Lock) Using: DySEB, TH, SBH1 (Snap Lock) |
- |
| SED | Snap Lock |
Used In: SEFR (Snap Lock) Using: DySEB, SBHW, TH, SBH1, calc (Snap Lock) |
Distance from catch point to Snap Lock top |
| SEA | Snap Lock | - | Snap end angle |
| SEFR | Snap Lock |
Using: SED (Snap Lock) |
- |
| STFR | Snap Lock |
Using: TW, TH, DySTB, STH (Snap Lock) |
- |
| GL | Glue Flap | - | Glue flap width |
| GLA | Glue Flap | - | Webbed flap angle |