| Name: | Description: | Used in/Using parameters: | Default expression (mm): |
| DySEB | Vertical size of the Snap End bevel |
Used In: SBHW, calc, SED (Snap Lock) Using: B (Main) |
B/3 |
| SBHW | Snap Bottom hole width |
Used In: TW, SED (Snap Lock) Using: A (Main) DySEB (Snap Lock) |
A-2*DySEB |
| TW | Tongue width |
Used In: STFR (Snap Lock) Using: SBHW (Snap Lock) |
SBHW |
| TH | Tongue height |
Used In: SBH, calc, SED, STFR (Snap Lock) Using: B (Main) |
0.15*B |
| DySTB | Vertical size of the Snap Tuck bevel |
Used In: STFR (Snap Lock) Using: B (Main) |
B/2 |
| SBH1 | Snap Bottom height |
Used In: SBH, DxSEB, calc, SED (Snap Lock) Using: B (Main) |
B/2 |
| SBH | Snap Bottom height |
Used In: STH (Snap Lock) Using: TH, SBH1 (Snap Lock) |
SBH1+TH |
| STH | Snap Tuck height |
Used In: STFR (Snap Lock) Using: UL (Main) LSC, STLL (Layers) SBH (Snap Lock) |
SBH-UL*STLL*LSC |
| DxSEB | Horizontal size of the Snap End bevel |
Using: SBH1 (Snap Lock) |
SBH1+d() |
| SBB | Snap Bottom width correction | - | 2*d() |
| SBB1 | Snap bottom bevel | - | 0 |
| SEB | Snap End width correction | - | 2*d() |
| calc | - |
Used In: SED (Snap Lock) Using: DySEB, TH, SBH1 (Snap Lock) |
if(0,(SBH1+TH)-DySEB, 1000,1) |
| SED | Distance from catch point to Snap Lock top |
Used In: SEFR (Snap Lock) Using: DySEB, SBHW, TH, SBH1, calc (Snap Lock) |
switch(calc, 0, TH, 1, SBH1+TH-DySEB) |
| SEA | Snap end angle | - | 20 |
| SEFR | - |
Using: SED (Snap Lock) |
SED/2 |
| STFR | - |
Using: TW, TH, DySTB, STH (Snap Lock) |
TH/2 |