| Parameter: | Group: | Used in/Using parameters (direct dependence): | Where would the design resize when I change the parameter expression: |
| A | Main |
Used In: TW (Tongue) |
Length of the box |
| B | Main |
Used In: PH (Panel) LGO, LFH (Locking Flap) LW, PH1 (Lid) PH2, PH3 (Panel) |
Width of the box |
| H | Main |
Used In: H1 (Main) PH (Panel) LGO, LGO1 (Locking Flap) PH1 (Lid) |
Height |
| H1 (B15.06.00.53.21) | Main |
Using: H (Main) |
Height |
| UL | Main |
Used In: PH (Panel) BO (Locking Flap) |
Defines if layers should be used |
| LSC | Layers |
Used In: PH (Panel) BO (Locking Flap) |
Layer step crease |
| PH | Panel |
Using: B, H, UL (Main) LSC (Layers) |
Panel Height |
| LGO | Locking Flap |
Used In: DxLFB, LGO1, LFH, LFR1, LFR2, LFR3, BO, LTR (Locking Flap) DxFCB, DyFCB, HFCO (Female Cut) Using: B, H (Main) |
Locking flap distance from crease to locking gap |
| DxLFB (B15.06.00.53.21) | Locking Flap |
Used In: DyLFB, LGO1, LTR (Locking Flap) VOFC (Female Cut) Using: LGO (Locking Flap) |
Horizontal size of locking flap bevel |
| DyLFB (B15.06.00.53.21) | Locking Flap |
Used In: LGO1, LTR (Locking Flap) HOFC (Female Cut) Using: DxLFB (Locking Flap) |
- |
| LGL (B15.06.00.53.21) | Locking Flap |
Used In: LTR (Locking Flap) FCL (Female Cut) |
- |
| LGO1 | Locking Flap |
Used In: LD (Locking Flap) VFCO, DxFCB (Female Cut) Using: H (Main) LGO, DxLFB, DyLFB (Locking Flap) |
Locking gap offset |
| DxT (B15.06.00.53) | Locking Flap |
Used In: LD (Locking Flap) |
Horizontal size of the taper |
| DyT (B15.06.00.53) | Locking Flap | - | Vertical size of the taper |
| LD (B15.06.00.53) | Locking Flap |
Used In: FCL (Female Cut) Using: LGO1, DxT (Locking Flap) |
Lid depth |
| LFH (B15.06.00.53) | Locking Flap |
Used In: LFR1, LFR2, LFR3 (Locking Flap) DxFCB (Female Cut) Using: B (Main) LGO (Locking Flap) |
Locking Flap Height |
| LFR1 (B15.06.00.53) | Locking Flap |
Using: LGO, LFH (Locking Flap) |
- |
| LFR2 (B15.06.00.53) | Locking Flap |
Used In: BO (Locking Flap) Using: LGO, LFH (Locking Flap) |
- |
| LFR3 (B15.06.00.53) | Locking Flap |
Using: LGO, LFH (Locking Flap) |
- |
| BO (B15.06.00.53) | Locking Flap |
Using: UL (Main) LSC (Layers) LGO, LFR2 (Locking Flap) |
Length of lock on dust flap |
| LFC | Locking Flap | - | Locking flap correction |
| LTR (B15.06.00.53.21) | Locking Flap |
Using: LGO, DxLFB, DyLFB, LGL (Locking Flap) |
Locking tongue radius |
| LGA | Locking Flap | - | Locking gap angle |
| FCL | Female Cut |
Used In: VFCO (Female Cut) Using: LGL, LD (Locking Flap) |
Female cut height |
| VOFC (B15.06.00.53.21) | Female Cut |
Used In: DyFCB (Female Cut) Using: DxLFB (Locking Flap) |
Vertical offset of the female cut |
| HOFC (B15.06.00.53.21) | Female Cut |
Used In: DxFCB (Female Cut) Using: DyLFB (Locking Flap) |
Horizontal offset of the female cut |
| VFCO (B15.06.00.53) | Female Cut |
Using: LGO1 (Locking Flap) FCL (Female Cut) |
Vertical female cut offset |
| DxFCB | Female Cut |
Using: LGO, LGO1, LFH (Locking Flap) HOFC (Female Cut) |
Horizontal size of the female cut bevel |
| DyFCB | Female Cut |
Using: LGO (Locking Flap) VOFC (Female Cut) |
Vertical size of the female cut bevel |
| ZW (B15.06.00.53.21) | Zipper |
Used In: TH (Tongue) |
- |
| HZO (B15.06.00.53.21) | Zipper | - | - |
| TH1 (B15.06.00.53.21) | Zipper | - | Tongue height |
| TH (B15.06.00.53.21) | Tongue |
Used In: DyTT (Tongue) Using: ZW (Zipper) |
Tongue height |
| TW (B15.06.00.53.21) | Tongue |
Used In: CL1 (Zipper) CL (Cut) Using: A (Main) |
Tongue width |
| DxTT (B15.06.00.53.21) | Tongue | - | Horizontal size of the tongue taper |
| DyTT (B15.06.00.53.21) | Tongue |
Used In: VCO (Cut) Using: TH (Tongue) |
Horizontal size of bottom taper |
| VTO (B15.06.00.53.21) | Tongue |
Used In: VCO (Cut) Using: DyT1 (Panel) |
- |
| CL1 (B15.06.00.53.21) | Zipper |
Using: TW (Tongue) |
Cut length |
| CL (B15.06.00.53.21) | Cut |
Using: TW (Tongue) |
Cut length |
| CD (B15.06.00.53.21) | Cut | - | Cut depth |
| CA (B15.06.00.53.21) | Cut | - | - |
| HFCO (B15.06.00.53) | Female Cut |
Using: LGO (Locking Flap) |
Horizontal femal cut offset |
| LW (B15.06.00.53) | Lid |
Using: B (Main) |
Lid width |
| PH1 | Lid |
Used In: FR (Lid) Using: B, H (Main) |
Panel height |
| PH2 (B15.06.00.53.21) | Panel |
Using: B (Main) |
Panel height |
| PH3 (B15.06.00.53.21) | Panel |
Used In: DyT1 (Panel) Using: B (Main) |
Panel height |
| DxT1 (B15.06.00.53.21) | Panel | - | Horizontal size of the taper |
| DyT1 (B15.06.00.53.21) | Panel |
Used In: VTO (Tongue) Using: PH3 (Panel) |
Vertical size of the taper |
| FR | Lid |
Using: PH1 (Lid) |
Fillet Radius |
| VCO (B15.06.00.53.21) | Cut |
Using: DyTT, VTO (Tongue) |
Vertical cut offset |
| VZO (B15.06.00.53.21) | Zipper | - | - |