| Parameter: | Group: | Used in/Using parameters (direct dependence): | Where would the design resize when I change the parameter expression: |
| A | Main |
Used In: VCO (Cut) |
Length of the box |
| B | Main |
Used In: TW (Locking Flap) FH (Flap) |
Width of the box |
| H | Main |
Used In: H1 (Main) DyFB, TW (Locking Flap) FH, DxT (Flap) CL1, CL (Cut) |
Height |
| H1 (B15.07.82.00, B15.07.82.00.a) | Main |
Used In: DxT (Flap) HCO (Cut) Using: H (Main) |
Height |
| UL | Main | - | Defines if layers should be used |
| LSC | Layers | - | Layer step crease |
| DyFB (B15.07.82.00.b) | Locking Flap |
Used In: DxFB, TW (Locking Flap) CO (Cut) Using: H (Main) |
- |
| DxFB (B15.07.82.00.b) | Locking Flap |
Used In: CL (Cut) Using: DyFB (Locking Flap) |
- |
| TW (B15.07.82.00.b) | Locking Flap |
Used In: TR, ArcH (Locking Flap) CL1 (Cut) Using: B, H (Main) DyFB (Locking Flap) |
Tongue width |
| TL (B15.07.82.00.b) | Locking Flap | - | Tongue length |
| TR (B15.07.82.00.b) | Locking Flap |
Using: TW (Locking Flap) |
Tongue Radius |
| ArcH (B15.07.82.00.b) | Locking Flap |
Using: TW (Locking Flap) |
Arc height |
| CO (B15.07.82.00.b) | Cut |
Using: DyFB (Locking Flap) |
Cut offset |
| FH (B15.07.82.00, B15.07.82.00.a) | Flap |
Used In: DyT, FR (Flap) VCO1 (Cut) Using: B, H (Main) |
Flap height |
| beta (B15.07.82.00, B15.07.82.00.a) | Flap | - | - |
| DxT (B15.07.82.00, B15.07.82.00.a) | Flap |
Using: H, H1 (Main) |
Horizontal size of the taper |
| DyT (B15.07.82.00, B15.07.82.00.a) | Flap |
Using: FH (Flap) |
Vertical size of the taper |
| FR (B15.07.82.00, B15.07.82.00.a) | Flap |
Using: FH (Flap) |
Fillet Radius |
| TPH | Trapezium |
Used In: CL1 (Cut) |
Trapezium height |
| BAng | Trapezium | - | Bevel angle |
| CL1 | Cut |
Using: H (Main) TW (Locking Flap) TPH (Trapezium) |
Cut length |
| SA (B15.07.82.00.b) | Cut | - | - |
| VCO (B15.07.82.00, B15.07.82.00.a) | Cut |
Used In: VCO1 (Cut) Using: A (Main) |
Vertical cut offset |
| CL | Cut |
Used In: HCO (Cut) Using: H (Main) DxFB (Locking Flap) |
Cut length |
| TH (B15.07.82.00, B15.07.82.00.a) | Cut |
Used In: FR1 (Cut) |
Tongue height |
| FR1 (B15.07.82.00, B15.07.82.00.a) | Cut |
Using: TH (Cut) |
Fillet Radius |
| VCO1 (B15.07.82.00, B15.07.82.00.a) | Cut |
Using: FH (Flap) VCO (Cut) |
Vertical cut offset |
| HCO (B15.07.82.00) | Cut |
Using: H1 (Main) CL (Cut) |
Horizontal Cut Offset |