| Name: | Description: | Used in/Using parameters: | Default expression (mm): |
| TL | E15.30.00.00.a: Tongue length |
Used In: TTW1, HHW1, HHO (Locking System) |
20 |
| E15.30.00.00: Tongue length |
Used In: TTW1, HHW1, HHO (Locking System) Using: B1 (Main) |
B1/4 | |
| TD | Tongue depth |
Used In: DxTT (Locking System) |
3 |
| DxTT | Horizontal size of the tongue taper |
Using: TD (Locking System) |
TD |
| TTO | Tuck tongue offset |
Used In: TTW1, HHO (Locking System) |
0 |
| TTW1 | Tuck tongue width |
Used In: TTH1, HHO (Locking System) Using: B, B1 (Main) TL, TTO, y (Locking System) |
2*TL |
| TTW3 | - |
Used In: TTW2, TTH2, TFR, HHW2, SL (Locking System) |
10 |
| TTW2 | - |
Used In: SL (Locking System) Using: TTW3 (Locking System) |
2*TTW3 |
| TTH1 | Tuck tongue height |
Used In: HHH (Locking System) Using: TTW1 (Locking System) |
TTW1/3 |
| TTH2 | - |
Used In: DyT, TFR (Locking System) Using: TTW3 (Locking System) |
TTW3 |
| DyT | Vertical size of the taper |
Used In: TFR (Locking System) Using: TTH2 (Locking System) |
TTH2/2 |
| TFR | - |
Using: TTW3, TTH2, DyT (Locking System) |
(TTH2-DyT)/2 |
| HHW1 | Hanger hole width |
Used In: HHW2, HHO (Locking System) Using: TL (Locking System) |
TL |
| HHW2 | - |
Using: TTW3, HHW1 (Locking System) |
TTW3 |
| HHH | - |
Using: TTH1 (Locking System) |
TTH1 |
| SL | Slit length |
Using: TTW3, TTW2 (Locking System) |
(TTW2-TTW3)/2+d() |
| VHO1 | Vertical hole offset |
Used In: TPH2 (Trapezoidal Flaps) PH1 (Panel) |
10 |
| x | - |
Used In: HHO (Locking System) Using: BAng, TPH2 (Trapezoidal Flaps) |
TPH2/tan(BAng) |
| y | - |
Used In: TTW1, HHO (Locking System) Using: BAng, TPH1 (Trapezoidal Flaps) |
TPH1/tan(BAng) |
| HHO | E15.30.00.00: Horizontal hole offset |
Using: TL, TTO, TTW1, HHW1 (Locking System) |
TTO+(TTW1-TL)/2-(HHW1-TL)/2 |
| E15.30.00.00.a: Horizontal hole offset |
Using: DxTB1 (Trapezoidal Flaps) TL, TTO, TTW1, x, y (Locking System) |
TTO+x-DxTB1+y+(TTW1-TL)/2 |