| Parameter: | Group: | Used in/Using parameters (direct dependence): | Where would the design resize when I change the parameter expression: |
| A (F60.14.00.00, F60.14.00.00.a) | Main |
Used In: W1 (Panels) TPH2 (Trapezium) CBL, CL1, CBL1 (Cut) |
Length of the box |
| B (F60.14.00.00, F60.14.00.00.a) | Main |
Used In: B1, VCO1 (Main) TPH (Trapezium) PH (Panels) TPH2 (Trapezium) PH2 (Panels) CSW (Insert) |
Width of the box |
| H (F60.14.00.00, F60.14.00.00.a) | Main |
Used In: H1 (Panels) |
Height |
| B1 (F60.14.00.00.a) | Main |
Using: B (Main) |
- |
| UL (F60.14.00.00, F60.14.00.00.a) | Main |
Used In: TPH1, TPH3 (Trapezium) |
Defines if layers should be used |
| LSC (F60.14.00.00, F60.14.00.00.a) | Layers |
Used In: TPH1, TPH2, TPH3 (Trapezium) |
Layer step crease |
| VCO1 (F60.14.00.00, F60.14.00.00.a) | Main |
Used In: H1 (Panels) VCO, CD1 (Cut) Using: B (Main) |
Vertical cut offset |
| GLC (F.60.14.00.00, F60.14.00.00.a) | Main |
Used In: CBL1 (Cut) |
Correction because of the glue flap |
| TPH (F.60.14.00.00, F60.14.00.00.a) | Trapezium |
Used In: TPH1 (Trapezium) Using: B (Main) |
Trapezium height |
| BAng (F.60.14.00.00, F60.14.00.00.a) | Trapezium |
Used In: BAng1, BAng2, BAng3 (Trapezium) |
Bevel angle |
| TPH1 (F.60.14.00.00, F60.14.00.00.a) | Trapezium |
Using: UL (Main) LSC (Layers) TPH (Trapezium) |
Trapezium height |
| BAng1 (F.60.14.00.00, F60.14.00.00.a) | Trapezium |
Using: BAng (Trapezium) |
Trapezium bevel angle |
| CT1 (F.60.14.00.00, F60.14.00.00.a) | Trapezium | - | Correction of the trapezium |
| CT2 (F.60.14.00.00, F60.14.00.00.a) | Trapezium | - | Correction of the trapezium |
| H1 (F.60.14.00.00 Insert, F60.14.00.00.a) | Panels |
Used In: CSO (Insert) PW (Panels) Using: H, VCO1 (Main) |
Height |
| PC1 (F60.14.00.00.a) | Insert |
Used In: CBL1 (Cut) |
Panel correction |
| PC2 (F60.14.00.00.a) | Panel |
Used In: CBL1 (Cut) |
Panel correction |
| W1 (F.60.14.00.00 Insert) | Panels |
Used In: CBL1 (Cut) Using: A (Main) |
Width |
| PH | Panels |
Used In: TPH3 (Trapezium) Using: B (Main) |
Panel Height |
| BAng2 (F.60.14.00.00, F60.14.00.00.a) | Trapezium |
Used In: TPH2 (Trapezium) CBL (Cut) Using: BAng (Trapezium) |
Trapezium bevel angle |
| TPH2 (F.60.14.00.00, F60.14.00.00.a) | Trapezium |
Used In: TPH3 (Trapezium) CBL, CD (Cut) Using: A, B (Main) LSC (Layers) BAng2 (Trapezium) |
Trapezium panel height |
| TPH3 (F.60.14.00.00, F60.14.00.00.a) | Trapezium |
Using: UL (Main) LSC (Layers) PH (Panels) TPH2 (Trapezium) |
Trapezium panel height |
| BAng3 (F.60.14.00.00, F60.14.00.00.a) | Trapezium |
Using: BAng (Trapezium) |
Bevel angle |
| BAng4 (F.60.14.00.00, F60.14.00.00.a) | Trapezium | - | - |
| CT3 (F.60.14.00.00, F60.14.00.00.a) | Trapezium | - | - |
| CT4 (F.60.14.00.00, F60.14.00.00.a) | Trapezium | - | - |
| CBL (F.60.14.00.00, F60.14.00.00.a) | Cut |
Using: A (Main) BAng2, TPH2 (Trapezium) |
Cut base length |
| CD (F.60.14.00.00, F60.14.00.00.a) | Cut |
Using: TPH2 (Trapezium) |
Cut depth |
| PH1 (F.60.14.00.00 Insert) | Panels | - | Panel height |
| PH2 (F.60.14.00.00 Insert, F60.14.00.00.a) | Panels |
Using: B (Main) |
Panel height |
| CSA (F60.14.00.00.a) | Insert | - | Cutting segment angle |
| CSW (F60.14.00.00.a) | Insert |
Using: B (Main) |
Cutting segment width |
| CSO (F60.14.00.00.a) | Insert |
Using: H1 (Panels) |
Cutting segment offset |
| PW (F.60.14.00.00 Insert) | Panels |
Using: H1 (Panels) |
Panel width |
| FR | Panels |
Used In: FR1 (Panels) |
Fillet Radius |
| VCO (F.60.14.00.00, F60.14.00.00.a) | Cut |
Used In: GLC1 (Glue Flap) Using: VCO1 (Main) |
Vertical cut offset |
| CL1 (F.60.14.00.00) | Cut |
Using: A (Main) |
Cut length |
| GL (F.60.14.00.00, F60.14.00.00.a) | Glue Flap | - | Glue flap width |
| GLA1 (F.60.14.00.00, F60.14.00.00.a) | Glue Flap |
Used In: GLA4 (Glue Flap) |
Glue flap angle |
| GLA2 (F.60.14.00.00, F60.14.00.00.a) | Glue Flap | - | Glue flap angle |
| GLC1 (F.60.14.00.00, F60.14.00.00.a) | Glue Flap |
Using: VCO (Cut) |
Correction of the glue flap |
| GLA3 (F.60.14.00.00, F60.14.00.00.a) | Glue Flap | - | Glue flap angle |
| GLA4 (F.60.14.00.00, F60.14.00.00.a) | Glue Flap |
Using: GLA1 (Glue Flap) |
- |
| FR1 (F.60.14.00.00 Insert, F60.14.00.00.a) | Panels |
Using: FR (Panels) |
Fillet Radius |
| PH3 (F60.14.00.00.a) | Insert | - | Panel height |
| DxCB | Cut | - | Horizontal size of cut bevel |
| CD1 (F.60.14.00.00 Insert, F60.14.00.00.a) | Cut |
Using: VCO1 (Main) |
Cut depth |
| FR2 (F.60.14.00.00 Insert, F60.14.00.00.a) | Cut | - | Fillet Radius |
| FR3 (F.60.14.00.00 Insert, F60.14.00.00.a) | Cut |
Used In: CBL1 (Cut) |
Fillet radius |
| CBL1 (F.60.14.00.00 Insert, F60.14.00.00.a) | Cut |
Using: A, GLC (Main) PC1 (Insert) PC2 (Panel) W1 (Panels) FR3 (Cut) |
- |